Skip to main content
Agricultural|By Texas Land Tax||11 min read

How Agricultural Land Is Valued in Texas: The Productivity Value

See how Texas appraisal districts value ag land: land categories, net-to-land income, the 2026 cap rate, and how to check your own productivity value.

Rear view of a green cotton harvester building a module in a field of open white cotton bolls under a clear blue sky

Texas appraises qualified farmland and ranchland at what the land can produce, not at what a developer would pay for it. Your appraisal district estimates the average annual income your class of land would earn, a figure called net to land, then divides it by a capitalization rate set in the Tax Code. The result is your productivity value.

This guide walks through the exact method in Chapter 23 of the Texas Tax Code and the Comptroller's appraisal manual. You will see how land categories work, how the 2026 cap rate is set, and how to pull the numbers behind your own notice so you can check the district's math.

What Records Do You Need Before You Start?

You can follow this method with two documents, both free from your appraisal district.

The first is your current notice of appraised value. It lists the appraised value of your land and, on most rural accounts, shows the productivity (ag) value and the market value on separate lines.

The second is your county's productivity appraisal schedule, sometimes called the ag value schedule. The chief appraiser is required to make these values available to landowners, and most districts post the schedule as a PDF. It lists every land category in the county with a per-acre value.

INFO

Your district must also give you the market value of your land alongside the productivity value. The chief appraiser determines both and records both on the appraisal records, per Tax Code 23.52(e). If you cannot find either figure on your notice, call the district and ask which category your parcel sits in.

How Does the Productivity Value Formula Work?

The valuation method is not a judgment call by your appraiser. It is a uniform, statewide formula that every district must follow. The Comptroller's Manual for the Appraisal of Agricultural Land sets it out, and districts are legally bound to use that manual.

The method is a modified income approach. An appraiser cannot afford to appraise each rural tract individually, so the state groups land into categories and values the categories instead. Five steps run the whole process:

  1. The district builds a land classification system for the county, grouping land into categories by its principal agricultural use and soil characteristics. Ranges, irrigated cropland, dry cropland, hay meadow and woodland typically sit in separate categories, often split again by soil type.
  2. For each category, the district estimates net to land, the average annual net income that class of land would generate. The estimate uses the five-year period preceding the year before the appraisal, and it assumes an owner using ordinary prudence in managing the land, per Tax Code 23.51(4).
  3. The district divides each category's net-to-land figure by that year's capitalization rate. The answer is the per-acre productivity value for the category.
  4. Every parcel in the county that qualifies gets assigned to a category in the system.
  5. Your parcel's acres are multiplied by the category's per-acre value. That product is your ag appraised value.

Two details in that sequence matter more than most owners realize. Net to land is an income potential standard, not your tax return. It asks what a prudent owner would earn from that class of land, averaged across five years. Whether your own operation beat or missed the county average for that class is, by design, irrelevant to the number on your notice.

The second detail is the ceiling. Tax Code 23.52(a) states plainly that the productivity value "may not exceed the market value as determined by other appraisal methods." If the formula ever produced a number above real market value, the land gets appraised at market instead.

What Is the Cap Rate and Where Does It Come From?

The divisor in step three does the heaviest lifting, and the Tax Code fixes it for you. For agricultural and open-space land, Tax Code 23.53 requires a cap rate that is the greater of 10.00 percent or the Farm Credit Bank of Texas interest rate published on the previous December 31, plus 2.50 percentage points.

For 2026, the Comptroller's cap rate page reports that the bank's rate on December 31, 2025, was 6.33 percent, which with the 2.50 added would have come to 8.83 percent. Because the statutory floor is higher, the 2026 ag cap rate is 10.00 percent.

The same cap rate page sets the timber figure at 7.77 percent for 2026, which is one reason the same acreage can appraise differently under timber valuation than under grazing categories.

INFO

Dividing by a 10.00 percent cap rate is the same as multiplying net to land by ten, so a category's productivity value will always be ten times its five-year average net-to-land income in a year when the rate sits at the 10.00 percent statutory floor. A higher rate compresses that multiple, which is why the rare years when the bank formula wins, like 2024, push ag values down.

The Comptroller's cap rate table shows the rate at 10.60 percent in 2024 and 10.13 percent in 2007, and at 10.00 percent in every other year from 2016 through 2026. When you compare this year's value to a prior year's, check whether the rate moved before you blame your soils.

Is Your Land Valued, or Just Your Land Category?

Here is the fact that surprises most first-time rural owners: your notice does not contain a value derived from your ranch specifically. You are valued as a member of a category.

What the district values What it ignores
The category's five-year average net-to-land income Your actual ranch income or losses
The category label on your account (range, cropland, hay) How well or poorly you manage
The statutory cap rate for the tax year Your improvements or improvements nearby
Acreage in each category on your parcel Your purchase price

This structure explains two common frustrations. Buying a pasture at a developer-inflated price does not raise your ag value, because the schedule values the category, not the sale. And a bad drought year on your place does not lower it, because your result washes into a five-year county average you cannot move alone.

It also points to where your leverage actually is. If your parcel sits in the wrong category, or one category's acreage is miscounted, that error is protestable every year, and in our experience it is the single most winnable ag protest a rural owner can bring. A parcel with live oak and grass used for grazing does not belong in a brushy range class when the county schedule has a native pasture class with a lower value. The Texas protest guide covers how to raise exactly that kind of category error before the deadline.

How Do You Check the District's Math on Your Parcel?

You can verify your appraised value with the schedule, a calculator, and basic division. Work through it in order.

  1. Find your parcel's category or categories on your notice or by asking the district, then pull that category's per-acre value from the county's productivity schedule.
  2. Multiply the per-acre value by the acres the district assigned to that category. If the schedule shows a 2026 value and a 2025 value, watch the direction of change. Income averages roll forward, so a single strong year entering the five-year window can lift a category even when nothing changed on the ground.
  3. Compare your computed figure to the ag value on your notice. They should match or fall very close. A gap suggests wrong acreage, a wrong category, or a schedule you pulled for the wrong year.
  4. Check the ceiling. Compare the productivity value to the market value line on the same notice. The productivity number should not exceed the market number, per Tax Code 23.52(a).
  5. If the numbers do not reconcile, protest. The 2026 deadline calendar lays out when notices go out and when your protest is due, and the Comptroller's protest process page states the standard May 1 filing date for most districts.

WARNING

A productivity value applies only to the portion of your land that qualifies. Improvements, and any acreage that fails the use test, ride on top of the productivity value as separately valued items. Read the ag valuation section of the notice before concluding your whole acreage was valued by the formula. Our guide to reading your tax bill walks through the lines.

What This Method Does Not Decide

Three questions sit outside the valuation formula, and owners routinely protest the wrong one.

Whether you qualify at all is a threshold question, not a valuation question. The current-use tests, including the five-of-the-seven-years history rule for open-space land, are answered on your open-space appraisal application (the Comptroller's special appraisal page covers the eligibility criteria the form tests), not at the ARB hearing about value. Start with the complete ag exemption guide if your eligibility, rather than your number, is the problem.

Which valuation provision applies shapes the paperwork more than the math. Under both Article VIII, Section 1-D and Section 1-D-1 of the Texas Constitution, qualifying land is valued by the same productivity method. The differences are in who may own qualifying land and the history required. We break that out in the 1-D vs 1-D-1 explainer.

What happens if the use stops is governed by the change-of-use tax, not this formula. When qualified land converts to a non-agricultural use, the district rolls back the difference between ag taxes and market-level taxes for the three preceding years, per Tax Code 23.55. The rollback penalty guide shows how that bill builds, and the rollback calculator runs the numbers on your own acreage.

Frequently Asked Questions

Does my appraised ag value change every year? Yes. The category value on your notice is recomputed annually because the five-year income window rolls forward and the cap rate is re-tested against the statute each year.

Can the district raise my ag value without raising market value? It can, within limits. Category values move with income data, and the productivity schedule is rebuilt from survey and income sources on a cycle. The method itself, however, is fixed: the income approach applies to average net to land by category, per Tax Code 23.52.

Is the productivity value the same as a discount off market value? No. It is an independent figure computed from income. Sometimes the gap between the two is wide, sometimes narrow, and no fixed percentage connects them.

Do improvements get valued by the same method? No. Buildings, improvements and other taxable items are appraised separately and added to the land's productivity value on your account.

Next Steps: Pull Your Schedule Before Your Notice Arrives

The work is smallest before the appraisal cycle reaches you. Download your county's current productivity schedule, note your category and per-acre value, and save a copy. When the notice arrives in the spring, you will already know what the correct number should be, and a mismatch becomes obvious in one glance.

Our position after reading hundreds of these notices is blunt: no rural owner should accept the ag value on a notice without first checking it against the county schedule. The schedule is public, the arithmetic is one multiplication, and a category error sits on your tax bill every year until you raise it. If your category, acreage or computed value looks wrong, the protest window is short and fixed. Move on the calendar, not on a hunch, and bring the schedule to the hearing.

Sources

Figures verified November 17, 2026 against primary sources: the Texas Comptroller's published 2026 cap rates under Tax Code 23.53 and 23.74, the text of Tax Code 23.51, 23.52 and 23.55, and the Comptroller's special appraisal and protest process pages. No legislation effective for 2026 changes the productivity-value method itself.

Need help with your application?

The Texas Land Tax consultant directory lists Texas ag-exemption professionals by county and specialty. Listings are self-submitted and are not vetted or endorsed by Texas Land Tax.

Find a consultant in your county

Estimate your savings